- Contact Person : Ms. Liu Maggie
- Company Name : Yueqing Mingwei Electric Co., Ltd.
- Tel : 86-577-62627101
- Fax : 86-577-62627367
- Address : Zhejiang,Yueqing,Gaohou industrial zone,Xiangyang town,Yueqing city.
- Country/Region : China
- Zip : 325619
SCN-1000-24 ATX Single Output SMPS 1000W Switch Power Supply
SWITCH POWER SUPPLY SINGLE TYPE SCN SERIES SCN-1000
1. Features
1. AC input range selectable by switch
2. Protections: short circuit/ over voltage/ overload/ over temp.
3. Built-in remote ON/OFF control
4. Built-in remote sense function
5. Built-in parellel operation function
6. Can adjust from 20-100% output voltage by external control 1-5VDC
7. Forced air cooling by built-in DC fan
8. 2 years warranty
9. SCN-1000-24 ATX Single Output SMPS 1000W Switch Power Supply
2. Specification
| Model | Output | Tolerance Voltage | Ripple and Noise | Efficiency |
| SCN-1000-12V | 12V, 0-80A | ± 1% | 240mvp-p | 84% |
| SCN-1000-13.5V | 13.5V,0-74A | ± 1% | 240mvp-p | 84% |
| SCN-1000-15V | 15V, 0-66A | ± 1% | 240mvp-p | 83% |
| SCN-1000-24V | 24V, 0-40A | ± 1% | 240mvp-p | 86% |
| SCN-1000-27V | 27V, 0-37A | ± 1% | 300mvp-p | 87% |
| SCN-1000-48V | 48V, 0-20A | ± 1% | 300mvp-p | 87% |
1. AC input voltage range: 90-130VAC/180-260VAC selectable by switch
2. AC inrush current: cold start, 60A at 230VAC
3. DC adjustment range: ±5% rated output voltage by potential meter 20-100% by external control voltage 1-5VDC
4. Setup, rise, hold up time: 800ms,50ms,16ms at full load and 230VAC
5. Overload protection: 110-135% constant current limiting, delay shutdown.
6. Over voltage protection: 110-135% rated output voltage
7. Withstand voltage: I/P-O/P, I/P-FG: 1500VAC, 1minute
8. Working temperature: -10°C~+50°C@100%, 65°C@50% load
9. Packing Size: 2.6kg, 6pcs/15.6kg/CTN
10. Dimension (L*W*H): 291*120*68 mm
3. Certificates:
4. Please Note
1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.
4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.
5. Load stability test: the load is from 0% to 100%, others 60%.
6. Total stability test: the load is from 0% to 100%, others 60%.
7. C2,3,6 must be knocked down.
SCN-1000-24 ATX Single Output SMPS 1000W Switch Power Supply
